VCAP6-NV

VMwareNSX
In this blog post I will cover section 4 objective 4.1 of the VCAP6-NV Deploy exam.

Objective 4.1 – Configure and Manage Logical Firewall Services

  • Configure Edge and Distributed Firewall rules according to a deployment plan:
    • Create/configure Firewall rule sections for specific departments
    • Create/configure Identity-based firewall (IDFW) for specific users/groups
  • Configure SpoofGuard policies to enhance security
  • Filter firewall rules to narrow a scope

Read Full Article

VMwareNSX
In this blog post I will cover section 3 objective 3.3 of the VCAP6-NV Deploy exam.

Objective 3.3 – Configure and Manage Additional VMware NSX Edge Services

  • Configure DHCP services according to a deployment plan:
    • Create/edit a DHCP IP Pool
    • Create/edit DHCP Static Binding
    • Configure DHCP relay
  • Configure DNS services
  • Configure NAT services to provide access to services running on privately addressed virtual machines

Read Full Article

VMwareNSX
In this blog post I will cover section 3 objective 3.2 of the VCAP6-NV Deploy exam.

Objective 3.2 – Configure and Manage Logical Virtual Private Networks (VPNs)

  • Configure IPSec VPN service to enable site to site communication
  • Configure SSL VPN service to allow remote users to access private networks
  • Configure L2 VPN service to stretch multiple logical networks across geographical sites

Read Full Article

VMwareNSX
In this blog post I will cover section 3 objective 3.1 of the VCAP6-NV Deploy exam.

Objective 3.1 – Configure and Manage Logical Load Balancing

  • Configure the appropriate Load Balancer model for a given application topology
  • Configure SSL off-loading
  • Configure a service monitor to define health check parameters for a specific type of network traffic
  • Optimize a server pool to manage and share backend servers
  • Configure an application profile and rules
  • Configure virtual servers

Read Full Article

VMwareNSX
In this blog post I will cover section 2 objective 2.3 of the VCAP6-NV Deploy exam.

Objective 2.3 – Configure and Manage Routing

  • Deploy the appropriate NSX Edge (ESG/LDR) device according to a deployment plan
  • Configure centralized and distributed routing
  • Configure default gateway parameters
  • Configure static routes
  • Select and configure appropriate dynamic routing protocol according to a deployment plan:
    • OSPF
    • BGP
    • IS-IS
  • Configure route redistribution to support a multi-protocol environment

Read Full Article