DHCP

Road to VCAP6-NV: Objective 3.3 – Configure and Manage Additional VMware NSX Edge Services

VMwareNSX
In this blog post I will cover section 3 objective 3.3 of the VCAP6-NV Deploy exam.

Objective 3.3 – Configure and Manage Additional VMware NSX Edge Services

  • Configure DHCP services according to a deployment plan:
    • Create/edit a DHCP IP Pool
    • Create/edit DHCP Static Binding
    • Configure DHCP relay
  • Configure DNS services
  • Configure NAT services to provide access to services running on privately addressed virtual machines

Read Full Article

Configure DHCP Services in VMware NSX

VMwareNSX

One of the services that the NSX Edge (ESG) provides is IP address pooling and one-to-one static IP address allocation and external DNS services. NSX Edge listens to the internal interface for DHCP requests and uses the internal interface IP as the default gateway for clients. In this post, I’ll show you how to configure DCHP on the NSX Edge to provide IP addresses to clients on a logical switch.

First, navigate to Networking & Security > NSX Edges and select you ESG. Then navigate to Manage > DHCP > Pools. Under Pools, click the green “+”.

dhcp01 Read Full Article